hi just fitted b-pipe to my 2008 700cc supperjet . fitted the .35 jets in carb , goes good in the water but cheaked the plugs and they looked very dry so opened up the high speed jet half a turn tested ,did this untill it was open one and a half turnes open plug still very dry and no change to the power at all. not shore what the plug should look like or when it is right . any one no where i should go from hear.
theres a good thread on this exact topic here http://www.x-h2o.com/showthread.php?194 ... -Blaster-1 gives several examples of people with different setups and what they use.
