New design rideplate for the surf. The length is cut flush with the back of the ski and there is no D cut so slightly less flip rotation then my mk1 plate better for bigger surf. Concave design makes for good wave slashing. For the racers it comes in +100mm which is the maximum length allowed within stock class regulations.
They look good sox, You need to put the centre holes in,and no rear holes on the shorter version for it to fit on an 08 onwards.
Thanks for the advise. Im modifing my plug to make a blaster racing plate for the classics class coming up on the 21st and 22nd january at Rotoma should be good times!
Not sure i grasp the question but they sit low at the back to keep the nose down but not quite as savage angle as the dynamics one. As dazza said we tested on his totally stock 08 and the ass stuck like shit to a blanket im a pretty crap racer and managed to do some ok corners and dazza and Paula were carving like pros.
yep thats what i ment if you make them flatter you can shim the back down to suit the rider better this way than too much kick (in my case too light ) Dad and i spent hours workin on this to find out what worked best on our 08s just my thoughts
