08 drive shaft

Discussion in 'For Sale & Wanted' started by T Bear, July 11, 2011.

  1. T Bear

    T Bear Active Member

    real long shot here but does anyone have a 08 drive shaft
    good condition for us to buy
    T Bear, July 11, 2011
    #1
  2. Dazza

    Dazza Member

    I don't have one Terry, but I believe a Blaster 1 shaft is the same length and might be easier to track down
    Dazza, July 11, 2011
    #2
  3. knoxie

    knoxie Active Member

    could try ozfreeride.....all those ozzies buying aftermarket hulls...most of which seem to use pre 08 driveshafts dont they? .....so if they used an 08+ as a donor ski there might be a few unused shafts floating around
    knoxie, July 11, 2011
    #3
  4. T Bear

    T Bear Active Member

    thanks will pull one out and have a measure
    T Bear, July 11, 2011
    #4
  5. Dazza

    Dazza Member

    Blaster 1 shaft is 732mm long including the thread part at the back end
    Dazza, July 11, 2011
    #5